gerd_renz3
VIP Member
I ran in a similar problem once during an upgrade. There is a table that
keeps track of wich tables have been converted. I do not remember the table
name.
What I did is I ran the TC with debug on to find out the table. It was in
the planner.mdb database in my case.
I then simply deleted the entries and my TC ran ok after that.
Good luck, Gerd
-----Mensagem original-----
De: [email protected] [mailto
[email protected]]Em nome
de Hickory
Enviada em: sexta-feira, 14 de dezembro de 2001 15:08
Para: [email protected]
Assunto: Duplicate Conversion
I have refreshed my 'dv7333' environment with 'pd7333'. However, when I try
to reapply "Update 3" to dv7333 I am under the impression that it still
thinks that it has "Update 3".
I have followed documents 'OTI-01-0026-Creating a mirror image of the CRP
Environment for the PROD Environment(in this case pd7333 to dv7333)'. I have
also followed document 'OTI-01-0024-Remove all Software Update References
and Records'
Two questions:
1. How can I investigate say the "Table Conversion Program's R98407 R98403"
did run. (I am not getting PDF's after resetting status to "40" and running
again from P96470?
2. If I can confirm that there are no duplicate conversions, then how can I
make OneWorld forget 'Update 3' was ever in dv7333?
Xe,SP16,HPUX 11.01, Oracle 8.1.6.3.1
--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=OW&Number=2
5342
+ - - - - - - - - - - - - - - - - - - - - - - - -+
This is the JDEList One World® / XE mailing list / forum.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found on the JDEList Forum at
http://www.JDEList.com
JDEList is not affiliated with JDEdwards®
+ - - - - - - - - - - - - - - - - - - - - - - - -+
keeps track of wich tables have been converted. I do not remember the table
name.
What I did is I ran the TC with debug on to find out the table. It was in
the planner.mdb database in my case.
I then simply deleted the entries and my TC ran ok after that.
Good luck, Gerd
-----Mensagem original-----
De: [email protected] [mailto
[email protected]]Em nomede Hickory
Enviada em: sexta-feira, 14 de dezembro de 2001 15:08
Para: [email protected]
Assunto: Duplicate Conversion
I have refreshed my 'dv7333' environment with 'pd7333'. However, when I try
to reapply "Update 3" to dv7333 I am under the impression that it still
thinks that it has "Update 3".
I have followed documents 'OTI-01-0026-Creating a mirror image of the CRP
Environment for the PROD Environment(in this case pd7333 to dv7333)'. I have
also followed document 'OTI-01-0024-Remove all Software Update References
and Records'
Two questions:
1. How can I investigate say the "Table Conversion Program's R98407 R98403"
did run. (I am not getting PDF's after resetting status to "40" and running
again from P96470?
2. If I can confirm that there are no duplicate conversions, then how can I
make OneWorld forget 'Update 3' was ever in dv7333?
Xe,SP16,HPUX 11.01, Oracle 8.1.6.3.1
--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=OW&Number=2
5342
+ - - - - - - - - - - - - - - - - - - - - - - - -+
This is the JDEList One World® / XE mailing list / forum.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found on the JDEList Forum at
http://www.JDEList.com
JDEList is not affiliated with JDEdwards®
+ - - - - - - - - - - - - - - - - - - - - - - - -+
