• Introducing Dark Mode! Switch by clicking on the lightbulb icon next to Search or by clicking on Default style at the bottom left of the page!

Raw material on BOM needs both fixed and variable quantity

Barryl8

Member
We are a machine shop facility that recently migrated to JDE 9.0.

We have raw material on a BOM that requires fixed and variable quantity.

For example, parent item, PARENT-abc has a manufacturing quantity of 5 each.
The raw material requirement item, RAW-BARSTOCK needs 2 inches of fixed quantity and 3 inches of variable.
The total required RAW-BARSTOCK would be 17 inches. 2 + (3*5)
We take this RAW-BARSTOCK of 17 inches, chuck 2 inches in a lathe then machine 5 pieces at 3 inches each. The 2 inches are simply consumed in the work order.

I know I can have two lines of the RAW-BARSTOCK on the BOM, one set as fixed and the other as variable.

Is there a way to setup the RAW-BARSTOCK material as a single line on the BOM with fixed and variable quantity?

Thanks in advance!

Barry
 
Top