oexpletive!
Member
Dear list...
Please help my B7333 LINKBSFN command is not running anymore!? When I run the command as part of the service pack upgrade process it seems to fail with the following message in the jde.log:
***********************************************************
246 Wed Mar 24 16:16:59 2010 crtdll.c134
OS40000005 - CRTSRVPGM failed with error message CPF0006
246 Wed Mar 24 16:16:59 2010 crtdll.c135
CRTSRVPGM SRVPGM(BSDV7333FB/BSDLL) MODULE(J1W_317394/*ALL) BNDSRVPGM(JDELIB JDEKRNL OWVER
***********************************************************
In the job log for each SRVPGM build it says the CRTSRVPGM is failing because the correct parameters are not being specified on the command - see above.
I have checked the JDE.INI on the AS400 and the problem seems obvious
The JDE.INI on the AS400 is only 80 chars long and so the record for the CRTSRVPGM command does not fit. The end is chopped off!! It reads:
CRTSRVPGM=CRTSRVPGM SRVPGM(%s/%s) MODULE(%s/*ALL) BNDSRVPGM(JDELIB JDEKRNL OWVER
When I believe (taken from an 812 ini) it shoud be something like:
CRTSRVPGM=CRTSRVPGM SRVPGM(%s/%s) MODULE(%s/*ALL) BNDSRVPGM(JDEUNICODE JDELIBB JDEKRNL OWVER) EXPORT(*ALL) OPTION(*DUPPROC *DUPVAR *UNRSLLVREF) ALWLIBUPD(*YES) TGTRLS(*CURRENT)
I presume everybody with B7333 and B7334 has a jde.ini on the AS400 of 80 chars? So I am now banging my head wondering how\where the rest of the parameters for the command are specified.
I dont know whether this is valid but I have tried adding the missing parameters into my jde.ini on another line but they are not read by LINKBSFN. If anyone knows to extend a line by adding a new line (I have tried + that I use in my CL commands) please let me know?
I am absolutely positive this used to work and nothing has changed since.
Can anyone out there shine any light on this or how I might proceed with my troubleshooting?
I am upgrading from SP23_U1 to SP24.1.1. I have also tried SP23J1 and SP24.0.3 but the LINKBSFN fails with all of them.
Cheers
Dom
OneWorld XE V5R3
Please help my B7333 LINKBSFN command is not running anymore!? When I run the command as part of the service pack upgrade process it seems to fail with the following message in the jde.log:
***********************************************************
246 Wed Mar 24 16:16:59 2010 crtdll.c134
OS40000005 - CRTSRVPGM failed with error message CPF0006
246 Wed Mar 24 16:16:59 2010 crtdll.c135
CRTSRVPGM SRVPGM(BSDV7333FB/BSDLL) MODULE(J1W_317394/*ALL) BNDSRVPGM(JDELIB JDEKRNL OWVER
***********************************************************
In the job log for each SRVPGM build it says the CRTSRVPGM is failing because the correct parameters are not being specified on the command - see above.
I have checked the JDE.INI on the AS400 and the problem seems obvious
The JDE.INI on the AS400 is only 80 chars long and so the record for the CRTSRVPGM command does not fit. The end is chopped off!! It reads:
CRTSRVPGM=CRTSRVPGM SRVPGM(%s/%s) MODULE(%s/*ALL) BNDSRVPGM(JDELIB JDEKRNL OWVER
When I believe (taken from an 812 ini) it shoud be something like:
CRTSRVPGM=CRTSRVPGM SRVPGM(%s/%s) MODULE(%s/*ALL) BNDSRVPGM(JDEUNICODE JDELIBB JDEKRNL OWVER) EXPORT(*ALL) OPTION(*DUPPROC *DUPVAR *UNRSLLVREF) ALWLIBUPD(*YES) TGTRLS(*CURRENT)
I presume everybody with B7333 and B7334 has a jde.ini on the AS400 of 80 chars? So I am now banging my head wondering how\where the rest of the parameters for the command are specified.
I dont know whether this is valid but I have tried adding the missing parameters into my jde.ini on another line but they are not read by LINKBSFN. If anyone knows to extend a line by adding a new line (I have tried + that I use in my CL commands) please let me know?
I am absolutely positive this used to work and nothing has changed since.
Can anyone out there shine any light on this or how I might proceed with my troubleshooting?
I am upgrading from SP23_U1 to SP24.1.1. I have also tried SP23J1 and SP24.0.3 but the LINKBSFN fails with all of them.
Cheers
Dom
OneWorld XE V5R3