Direct output to specific drawer on As/400

[ClaGe]

Hi,

I'm not sure I'm dropping this in the right forum but give it a try, my client has the following problem:
Some reports from EnterpriseOne need to be directed to specific drawers on specific printers.
However, this does never happen inspite of the fact that the correct drawer is specified in the spoolfile on AS/400.
In first instance I tried to fix this by defining Workstation Customizing Objects (WSCST), but without success.
Than found out that WSCST is not possible for printerfiles with the Printer Device Type parameter *USERASCII and you might have guessed: all output is defined as *USERASCII.
Is there anyone with experience with this matter?
My client is running ERP8 SP23 on AS/400 with fat clients and HTML.

Thanks,

 

[amwalshjde]

I attempted to do this a while ago when testing the fesability of eliminating Formscape and printing right from JDE. I had limited success using Workstation Custimization Objects. We were trying to print from the AS/400 to HP4000 series printers.

I have attached a document (two parts) that I saved from our trials that may be of assistance

 

[ClaGe]

Aaron,

Thanks for your reply.
I'll use your input.