kieranm
Member
Hi everyone
I want to change some of the multi-threaded UBE queues on our system to single thread, but I am unfamilar with the Unix side (I have done this before on AS/400 and NT sites).
From what I understand looking at the files, the config is kept in the RunOneWorld.sh file in 2 places:-
OWUSR="xxxxx"
OWPWD="xxxxx"
OWENV="PD7333"
OWQUE1="QB7333"
OWQUE2="QB7333"
OWQUE3="QSINGLE"
OWQUE4="QSCHED"
OWQUE5="QSCHED"
OWQUE6="QSCHED"
etc
And further down:-
echo " Starting OneWorld batch queues..." >> $LOGFILE
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE1 UBE 2 > $EVRHOME/log/ubeque1.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE2 UBE 2 > $EVRHOME/log/ubeque2.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE3 UBE 2 > $EVRHOME/log/ubeque3.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE4 UBE 2 > $EVRHOME/log/ubeque4.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE5 UBE 2 > $EVRHOME/log/ubeque5.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE6 UBE 2 > $EVRHOME/log/ubeque6.log 2>&1 &
etc
Do I remove the appropiate entries from these areas? or is there anything else that is required?
Thanks
Kieran
ERP8, Sp19_E1, Solaris 5.8, Oracle 8.1.7.3
I want to change some of the multi-threaded UBE queues on our system to single thread, but I am unfamilar with the Unix side (I have done this before on AS/400 and NT sites).
From what I understand looking at the files, the config is kept in the RunOneWorld.sh file in 2 places:-
OWUSR="xxxxx"
OWPWD="xxxxx"
OWENV="PD7333"
OWQUE1="QB7333"
OWQUE2="QB7333"
OWQUE3="QSINGLE"
OWQUE4="QSCHED"
OWQUE5="QSCHED"
OWQUE6="QSCHED"
etc
And further down:-
echo " Starting OneWorld batch queues..." >> $LOGFILE
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE1 UBE 2 > $EVRHOME/log/ubeque1.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE2 UBE 2 > $EVRHOME/log/ubeque2.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE3 UBE 2 > $EVRHOME/log/ubeque3.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE4 UBE 2 > $EVRHOME/log/ubeque4.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE5 UBE 2 > $EVRHOME/log/ubeque5.log 2>&1 &
$SYSTEM/bin32/runque.sh $OWUSR $OWPWD $OWENV $OWQUE6 UBE 2 > $EVRHOME/log/ubeque6.log 2>&1 &
etc
Do I remove the appropiate entries from these areas? or is there anything else that is required?
Thanks
Kieran
ERP8, Sp19_E1, Solaris 5.8, Oracle 8.1.7.3