• Introducing Dark Mode! Switch by clicking on the lightbulb icon next to Search or by clicking on Default style at the bottom left of the page!

UBE Interconnect

JonFoster

Member
We are trying to interconnect multiple custom UBE's (e.g. reports). In the event rules we have inserted the report interconnect option and selected various versions, however once all UBE's have been run it recycles (i.e. never ending loop. Are we on the right path? How do we end the UBE submission when the last report has been run.

Appreciate any help someone can provide.
 

owss

Member
Re: [UBE Interconnect ]

What section (driver??) and event are you using??


JonFoster <jonfo@trendwestresorts.com> wrote:
We are trying to interconnect multiple custom UBE's (e.g. reports). In the
event rules we have inserted the report interconnect option and selected
various versions, however once all UBE's have been run it recycles (i.e. never
ending loop. Are we on the right path? How do we end the UBE submission when
the last report has been run.

Appreciate any help someone can provide.


--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=OW&Number=2462

*************************************************************
This is the JDEList One World / XE Mailing List.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found at http://www.JDELIST.com
*************************************************************


____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
 

JonFoster

Member
We are on version B733.2, service pack 11.3. I am not sure how the versions related to SP.

Are you aware what was fixed in the UBE interconnect? We were under the impression our issue was a feature versus a bug.

Thanks for weighing in!
 

WalterD

Member
I had UBE interconnects fail when I applied SP11.1 from 7.1
I could run each UBE on it's own and it would work fine.
Applied SP13.1 (Denver's fix), all interconnect UBE's now work fine.
 

Frosty the Coder

Legendary Poster
Into _which_ event did you place the interconnects?

Gene Piekarski, Jr.

Corning Data Services
gpiekarski@corningdata.com

(office) (716) 853-6215 <<<<<-----12/15/00-----
(cell) (716) 472-3589
(home) (716) 662-7171




JonFoster
<jonfo@trendwestre To: jdelistml@jdelist.com
sorts.com> cc:
Sent by: Subject: UBE Interconnect ~~0:2462
owner-jdelistml@jd
elist.com


12/11/00 08:25 PM
Please respond to
jdelist






We are trying to interconnect multiple custom UBE's (e.g. reports). In the
event rules we have inserted the report interconnect option and selected
various versions, however once all UBE's have been run it recycles (i.e.
never ending loop. Are we on the right path? How do we end the UBE
submission when the last report has been run.

Appreciate any help someone can provide.


--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat
=&Board=OW&Number=2462
*************************************************************
This is the JDEList One World / XE Mailing List.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found at http://www.JDELIST.com
*************************************************************

*************************************************************
This is the JDEList One World / XE Mailing List.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found at http://www.JDELIST.com
*************************************************************
 
Top