8.9 SP3 ER Debugger – CreateService failed. Unable to continue.

[Zoltan_Gyimesi]

Starting the ER debugger application, the debugger window freezed for a while, finally bring up an error message window: „CreateService failed. Unable to continue.”

Pressing the OK on the message window, the debugger exits too.

I found Soltion ID 200825696 document, which reports exactly this problem.
*************************
Upon trying to start up the ER debugger, the screen appears but then an error is received of the flavor "SendServiceInfo failed" or "CreateService failed".
<A>
re-register DebuggerService.dll fixed the issue

Start->Run->regsvr32 DebuggerService.dll
*************************
I applied the described solution, registering DebuggerService.dll, but did not solved the problem.

Platform: Win2000, EO 8.9 SP3

All tip, hint, help will be appreciated.

Thanks in advance,

Zoltán

 

[Tak]

This may not the solution for all of the people.
I encountered the same problem with EnterPrizeOne 8.10
My locale is set to Japanese, so changing the locale from Japanese to English(USA) solves this problem.

This may be the answer if you set the local other than
English(USA).

Hope this helps

 

[Zoltan_Gyimesi]

Hi Tak,

First of all, you are welcome aboard.

Thanks for your suggestion.

Though I have got already the solution, that you described.
I received it from Michal Kluka on 10/22/04 in one of my related thread "8.93.B1 - EO1 freeze for minutes".

You are right: "This may not the solution for all of the people"

This is a solution for us, but not the real one.

In our Regional settings everything differ from the US, what can also cause problems, so after I switch to Englis(US), first I have to override all settings, like decimal and list separator, number, currency and date format. I suppose, you are in the same boat.

Thanks your suggestion anyway.

Regards,

Zoltán

 

[JDEAT]

Hi,

i had the same problem with come clients on 8.9 and here are my solutions:

1.st:
there should be a folder on the client:
c:\Program Files\JDEdwards\BPMBroker\JRE\1.3

Check this folder if there are some files under
this strukture. If not, the installation of the
BPMBroker failed. This is part of the E1Client Install.
You can try to Install the PBMBroker from the
Depl. Server manually
(..\OneWorldClientInstall\ThirdParty\PBMBroker)

2nd: Check your Registry entries from the Client. There
should be some entries for the PBMBroker under
HKLM\SOFTWARE\JDEdwards\PBMBroker..

(See Attached RegFile)


This procedure workes for me several times - hope this will
solve your problem too.

Good Luck

 

[JDEAT]

Hi,
Just found another solution:
Sometimes the Broker installation failed with an InstallShield Error 1607.

In this case try that:
On the Client Desktop where the installation failed, cklick on Start, click Run, type MSIEXEC /REGSERVER

after that, try to install the BPMBroker again.