Jamie_Yates
Active Member
Hi ALl
I'm trying to modify P3112 to update URRF in F3112.
I have added the my URRF variable to the correct item in F3112WorkOrderRoutingsEditLine BSFN call in the 'Row Exit & Changed - Asynch' grid event.
I can see in debugger this call being run, but URRF does not get updated in the F3112.
Here is the call (standard JDE except for URRF added)
<font class="small">Code:</font><hr /><pre>
0178 F3112 Work Order Routings Edit Line
GC Cache Row Number [HIDDEN] <> nCacheRowNumber
UNDEFINED X szComputerID
"1" -> cProcessEdits
UNDEFINED X cProcessModule
VA frm_szProcessModule -> szProcessModule
"1" -> cActionCode
"<Zero>" -> cDataDictionaryValidation
"<Zero>" -> cSuppressErrorMessage
VA frm_szErrorMessageID_DTAI <- szErrorMessageID
VA frm_cErrorCode_ERRC <- cErrorCode
FC Order Number -> mnOrderNumber
GC Operation Sequence -> mnOperationSequence
GC Operation Type -> szTypeOfOperation
GC Work Center -> szWorkCenter
GC Operation Status -> szOperationStatus
GC Operation Description -> szOperationDescription
GC Machine Run Hours -> mnStdRunMachine
GC Labor Run Hours <> mnStdRunLabor
GC Setup Hours -> mnStdSetupHours
GC Queue Hours -> mnQueueTime
GC Move Hours -> mnMoveTime
GC Rate <> mnPieceworkRate
GC Crew Size -> mnCrewSize
GC Start Date <> jdStartDate
GC Requested Date <> jdRequestedDate
GC Assigned To -> mnAddressNumber
GC Pay Point <> cPayPointCode
GC Unit Number [HIDDEN] -> szEquipmentTag
GC Instruction Number -> szInstructionNumber
GC Related Order -> szRelatedNumber
GC PO Type -> szRelatedType
GC Next Operation -> mnNextOperationSequence
GC Cons Prod <> szConsProd
GC Assigned Name -> szAssignedName
GC Time Basis -> cTimeBasisCode
GC Overlap Percent -> mnPercentOverlap
GC Yield Percent -> mnPercentOpYield
GC Cumulative Yield Percent X mnPercentCumYield
UNDEFINED X mnQuantityOrdered
UNDEFINED X mnQtyCompleted
UNDEFINED X mnQtyScrapped
UNDEFINED X mnQuantityatOperation
UNDEFINED X szUOM
UNDEFINED X cPayPointStatus
GC Requested Date -> jdTransactionDate
GC Primary Supplier -> mnVendor
UNDEFINED X mnParentItemNumber
UNDEFINED X sz2ndItemNumber
UNDEFINED X sz3rdItemNumber
UNDEFINED X szOrderType
UNDEFINED X szOrderSuffix
UNDEFINED X szRoutingType
FC Branch/Plant -> szBranchPlant
GC Line/Cell Identifier -> szLineID
UNDEFINED X szAutoLoadDescription
UNDEFINED X szInspectionCode
UNDEFINED X cLaborOrMachine
UNDEFINED X szJobCategory
UNDEFINED X mnCriticalRatio
UNDEFINED X mnSlackTimeRatio
GC Complete Date -> jdCompletionDate
GC Estimated Start Time_PBTM [HIDDEN] -> mnBeginTime
GC Actual End Time_PETM [HIDDEN] -> mnEndTime
UNDEFINED X cRequestedShiftCode
UNDEFINED X cStartShiftCode
UNDEFINED X cCompletedShiftCode
UNDEFINED X mnPercentLeadtime
UNDEFINED X mnActualMachineHours
GC Run Labor -> mnActualLaborHours
UNDEFINED X mnActualSetupHours
UNDEFINED X mnShrinkFactor
UNDEFINED X mnHoursUnacctDirectLabor
UNDEFINED X mnHoursUnacctSetupLabor
UNDEFINED X mnHoursUnacctMachine
UNDEFINED X mnAmountUnacctDirectLabor
UNDEFINED X mnAmountUnacctSetupLabor
UNDEFINED X mnAmountUnacctMachine
UNDEFINED X szProjectCostCenter
UNDEFINED X szObjectAccount
UNDEFINED X szSubsidiary
UNDEFINED X szRelatedCompany
UNDEFINED X mnRelatedLineNumber
UNDEFINED X szDocumentType
UNDEFINED X szUserReservedCode
UNDEFINED X jdUserReservedDate
UNDEFINED X mnUserReservedAmount
VA TestURRF -> szUserReservedReference
UNDEFINED X mnUserReservedNumber
VA frm_mnJobNumber_JOBS -> mnJobNumber
GC Interm Flag (wf) EV03 [HIDDEN] <> cIntermediateFlag
GC Extended Cost <- mnExtendedCost
GC Resource -> mnResourceunitsconsumed
GC Capacity UOM -> szUMCapacityUOM
GC Repln locn file fmt [HIDDEN] -> szLocation
UNDEFINED X mnRunLaborCurrent
UNDEFINED X mnRunMachineCurrent
GC Cost Type -> szCostType
UNDEFINED X mnSetupLaborCurrent
UNDEFINED X szWorkcenterBranch
GC CSMS Cache Row Number [HIDDEN] <> nCSMSCacheRowNumber
VA frm_nCSMSLastRowNumber_INT02 <> nCSMSLastRowNumberUsed
GC Asset Number [HIDDEN] -> mnAssetItemNumber
</pre><hr />
Before you ask, yes the variable is populated with data.
Thanks for any advice.
Jamie
I'm trying to modify P3112 to update URRF in F3112.
I have added the my URRF variable to the correct item in F3112WorkOrderRoutingsEditLine BSFN call in the 'Row Exit & Changed - Asynch' grid event.
I can see in debugger this call being run, but URRF does not get updated in the F3112.
Here is the call (standard JDE except for URRF added)
<font class="small">Code:</font><hr /><pre>
0178 F3112 Work Order Routings Edit Line
GC Cache Row Number [HIDDEN] <> nCacheRowNumber
UNDEFINED X szComputerID
"1" -> cProcessEdits
UNDEFINED X cProcessModule
VA frm_szProcessModule -> szProcessModule
"1" -> cActionCode
"<Zero>" -> cDataDictionaryValidation
"<Zero>" -> cSuppressErrorMessage
VA frm_szErrorMessageID_DTAI <- szErrorMessageID
VA frm_cErrorCode_ERRC <- cErrorCode
FC Order Number -> mnOrderNumber
GC Operation Sequence -> mnOperationSequence
GC Operation Type -> szTypeOfOperation
GC Work Center -> szWorkCenter
GC Operation Status -> szOperationStatus
GC Operation Description -> szOperationDescription
GC Machine Run Hours -> mnStdRunMachine
GC Labor Run Hours <> mnStdRunLabor
GC Setup Hours -> mnStdSetupHours
GC Queue Hours -> mnQueueTime
GC Move Hours -> mnMoveTime
GC Rate <> mnPieceworkRate
GC Crew Size -> mnCrewSize
GC Start Date <> jdStartDate
GC Requested Date <> jdRequestedDate
GC Assigned To -> mnAddressNumber
GC Pay Point <> cPayPointCode
GC Unit Number [HIDDEN] -> szEquipmentTag
GC Instruction Number -> szInstructionNumber
GC Related Order -> szRelatedNumber
GC PO Type -> szRelatedType
GC Next Operation -> mnNextOperationSequence
GC Cons Prod <> szConsProd
GC Assigned Name -> szAssignedName
GC Time Basis -> cTimeBasisCode
GC Overlap Percent -> mnPercentOverlap
GC Yield Percent -> mnPercentOpYield
GC Cumulative Yield Percent X mnPercentCumYield
UNDEFINED X mnQuantityOrdered
UNDEFINED X mnQtyCompleted
UNDEFINED X mnQtyScrapped
UNDEFINED X mnQuantityatOperation
UNDEFINED X szUOM
UNDEFINED X cPayPointStatus
GC Requested Date -> jdTransactionDate
GC Primary Supplier -> mnVendor
UNDEFINED X mnParentItemNumber
UNDEFINED X sz2ndItemNumber
UNDEFINED X sz3rdItemNumber
UNDEFINED X szOrderType
UNDEFINED X szOrderSuffix
UNDEFINED X szRoutingType
FC Branch/Plant -> szBranchPlant
GC Line/Cell Identifier -> szLineID
UNDEFINED X szAutoLoadDescription
UNDEFINED X szInspectionCode
UNDEFINED X cLaborOrMachine
UNDEFINED X szJobCategory
UNDEFINED X mnCriticalRatio
UNDEFINED X mnSlackTimeRatio
GC Complete Date -> jdCompletionDate
GC Estimated Start Time_PBTM [HIDDEN] -> mnBeginTime
GC Actual End Time_PETM [HIDDEN] -> mnEndTime
UNDEFINED X cRequestedShiftCode
UNDEFINED X cStartShiftCode
UNDEFINED X cCompletedShiftCode
UNDEFINED X mnPercentLeadtime
UNDEFINED X mnActualMachineHours
GC Run Labor -> mnActualLaborHours
UNDEFINED X mnActualSetupHours
UNDEFINED X mnShrinkFactor
UNDEFINED X mnHoursUnacctDirectLabor
UNDEFINED X mnHoursUnacctSetupLabor
UNDEFINED X mnHoursUnacctMachine
UNDEFINED X mnAmountUnacctDirectLabor
UNDEFINED X mnAmountUnacctSetupLabor
UNDEFINED X mnAmountUnacctMachine
UNDEFINED X szProjectCostCenter
UNDEFINED X szObjectAccount
UNDEFINED X szSubsidiary
UNDEFINED X szRelatedCompany
UNDEFINED X mnRelatedLineNumber
UNDEFINED X szDocumentType
UNDEFINED X szUserReservedCode
UNDEFINED X jdUserReservedDate
UNDEFINED X mnUserReservedAmount
VA TestURRF -> szUserReservedReference
UNDEFINED X mnUserReservedNumber
VA frm_mnJobNumber_JOBS -> mnJobNumber
GC Interm Flag (wf) EV03 [HIDDEN] <> cIntermediateFlag
GC Extended Cost <- mnExtendedCost
GC Resource -> mnResourceunitsconsumed
GC Capacity UOM -> szUMCapacityUOM
GC Repln locn file fmt [HIDDEN] -> szLocation
UNDEFINED X mnRunLaborCurrent
UNDEFINED X mnRunMachineCurrent
GC Cost Type -> szCostType
UNDEFINED X mnSetupLaborCurrent
UNDEFINED X szWorkcenterBranch
GC CSMS Cache Row Number [HIDDEN] <> nCSMSCacheRowNumber
VA frm_nCSMSLastRowNumber_INT02 <> nCSMSLastRowNumberUsed
GC Asset Number [HIDDEN] -> mnAssetItemNumber
</pre><hr />
Before you ask, yes the variable is populated with data.
Thanks for any advice.
Jamie