hs3536
Member
Hi all,
According to the successor in jdelist, they mentioned that business function Send E-Mail - HRM can be working in AS400 if sending email without attachment. I have been trying it for quite some time but still cant figure out what's the problem. It's working fine from Windows local running but AS400, not.
Below is my jde.ini setup in AS400:
[JDEMAIL]
mailProfile="MS Exchange Settings"
Rule1=90|OPT|MAILSERVER=mail.xxxx.com.my
Rule2=100|DEFAULT|[email protected]
Rule3=110|DEFAULT|[email protected]
Rule4=120|DEFAULT|[email protected]
Rule5=130|OPT|MERGELOCAL=1
Rule6=140|OPT|UPDATELOCAL=0
ClientType=Windows
and here is my business function parameter:
010 Send E-Mail - HRM
PO szEmailAddFrom_HLNK -> BF szFrom
PO szEmailAddTo_HLNK -> BF szTo
PO szEmailAddCC_HLNK -> BF szCC
VA evt_szSubject_CMDS -> BF szSubject
VA evt_szTextMessage_CMDS -> BFszMessageTextChar256
JDE version - E810
Any idea on root cause?
Thanks
According to the successor in jdelist, they mentioned that business function Send E-Mail - HRM can be working in AS400 if sending email without attachment. I have been trying it for quite some time but still cant figure out what's the problem. It's working fine from Windows local running but AS400, not.
Below is my jde.ini setup in AS400:
[JDEMAIL]
mailProfile="MS Exchange Settings"
Rule1=90|OPT|MAILSERVER=mail.xxxx.com.my
Rule2=100|DEFAULT|[email protected]
Rule3=110|DEFAULT|[email protected]
Rule4=120|DEFAULT|[email protected]
Rule5=130|OPT|MERGELOCAL=1
Rule6=140|OPT|UPDATELOCAL=0
ClientType=Windows
and here is my business function parameter:
010 Send E-Mail - HRM
PO szEmailAddFrom_HLNK -> BF szFrom
PO szEmailAddTo_HLNK -> BF szTo
PO szEmailAddCC_HLNK -> BF szCC
VA evt_szSubject_CMDS -> BF szSubject
VA evt_szTextMessage_CMDS -> BFszMessageTextChar256
JDE version - E810
Any idea on root cause?
Thanks