Subsystem Processing

I have copied a version of the R42520 Subsystem and checked it in. I also went to the setup of the subsystem R42520 in design and pressed Generate. This created a C File.

In P4210 I have changed my process for subsystem on R42520 and placed the version that I need to use in the versions tab. I submit the R42520 version to the 400. It seems to be checking for entries because if I constantly hit update, It takes up processing time on the 400 every once in a while.

When I place a order using the P4210 version it does not print but the status does update as if it ran through.

Please Help

JAB
OW XE
AS/400 (Enterprise)
WinNT (Deployment)
SP16
<P ID="edit"><FONT SIZE=-1>Edited by jde_x_pert on 11/16/01 12:58 PM.</FONT></P>

Are you getting a record inserted into the SVM7333.F986113 table when you
press OK on the sales order?

Our setup of subsystem pickslip printing in Xe is as follows:

We submit our pickslip ube via the runube command on the enterprise server
every Monday morning at 7.00. The user is JDE. We found that we needed an
active default printer set up in OneWorld for the user JDE for R42520
version PICKSLIP for the printer that we wanted to print to in the PD7333
environment.

Also check that Adobe Acrobat reader is installed on the enterprise server.

I'm not sure if this is going to help, as if your status is not getting
moved on, then it sounds like the subsystem version is not picking up the
record out of F986113. Printing it automatically is quite another matter!



Regards

Marty Fleming
Business Analyst
Richmond Limited

Phone: +64 +6 8786464 Ext 8168
Mobile: +64 +21 478946
Fax : +64 +6 8780959
Email: mailto:[email protected]