RE: Records loaded into F0911Z1 via WEBMETHODS is not showing in

eydeak

VIP Member
RE: Records loaded into F0911Z1 via WEBMETHODS is not showing in

Use UTB to check what value you are populating field EDSP with. P0911Z1
will exclude processed records (EDSP = 1) from the grid.



Ellen Deak
Senior Analyst/Programmer
Cooper-Standard Automotive
OneWorld Xe (B7333, Service Pack 22, Update 7)
AS/400 DB2
 
Hi,
The EDSP is populated with blank. We tried populating with 0 too. even then, its not showing up in the app.
thanks in advance.

Sathya.
 
Hi,

I was going to suggest populating EDSP with "0" as I have had this problem too when it is <Blank>. You say you have already tried that. Try manually populating the field with "0" to see if that will make the records show in P0911Z1. At least then you will have an idea where the problem lies.

Cheers
 
Hi, Sorry this has come so late but try checking your field alignment,
especially MCU if it is there. If the import to the F0911Z1 has come
from Access or similar it left aligns the Business Unit field because it
is defined as *CHAR.

Try maintaining one of the records through the JDE software and then
look through UTB and compare alignment and also look for any other
fields that may have received 'default' values.

Cheers
Neil
 
Back
Top