gerd_renz3
VIP Member
Kevin,
the fact that an error disappears the moment you turn on debugging is not
knew in OW. We have seen that quite a few times in other situations. The
reason is not so much that it slows down the process. I was explained by
some tools-gurus that when debugging is turned on all function calls are
forced to be syncronous while some would be called asyncronous in normal
processing mode.
Gerd
---Mensagem original-----
De: [email protected] [mailto
[email protected]]Em
nome de Kevin_Benjamin
Enviada em: quarta-feira, 20 de junho de 2001 10:18
Para: [email protected]
Assunto: Re: USER OVERRIDES
An update to the situation!
I have confirmed with JDE that SP16 will indeed address the User Overrides
issue. Get this...They told me that it does not address any specific
problems, just that they felt it needed some work. Apparently they are
overhauling the entire User Override process. For one, it is no longer
going to use cache to store the overrides in memory, but instead will right
the user overrides to the table as soon as the user exits the form. Instead
of using binary, they are switching to XML, etc. You do not usually
overhaul a program unless it is causing some serious problems. Anyway, I
think that there are a lot more poeple out there complaining about user
overrides. At any rate, I turned on debugging to capture some data for JDE
from one of the workstations that was having the problem, and wouldn't you
know it...the formats saved in the table. I have had this happen before
when I have turned on debugging. It had to do with the fact that when
debugging is on it slows down OneWorld !
!
dramatically, and this seems to resolve the problem. We had it happen in
our previous version, and JDE had to get FarPoint to rewrite there grid DLL
for us.
Anyway, I am going to turn debugging on, on another machine to see if i can
get the formats to stick. If it works, I can at least make them happy until
we can install SP16.
Kevin Benjamin
STIHL LIMITED
OneWorld Admin
XE SP15.1, Update 1, AS400, NTSQL, Citrix
--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=OW&Number=1
3645
the fact that an error disappears the moment you turn on debugging is not
knew in OW. We have seen that quite a few times in other situations. The
reason is not so much that it slows down the process. I was explained by
some tools-gurus that when debugging is turned on all function calls are
forced to be syncronous while some would be called asyncronous in normal
processing mode.
Gerd
---Mensagem original-----
De: [email protected] [mailto
[email protected]]Emnome de Kevin_Benjamin
Enviada em: quarta-feira, 20 de junho de 2001 10:18
Para: [email protected]
Assunto: Re: USER OVERRIDES
An update to the situation!
I have confirmed with JDE that SP16 will indeed address the User Overrides
issue. Get this...They told me that it does not address any specific
problems, just that they felt it needed some work. Apparently they are
overhauling the entire User Override process. For one, it is no longer
going to use cache to store the overrides in memory, but instead will right
the user overrides to the table as soon as the user exits the form. Instead
of using binary, they are switching to XML, etc. You do not usually
overhaul a program unless it is causing some serious problems. Anyway, I
think that there are a lot more poeple out there complaining about user
overrides. At any rate, I turned on debugging to capture some data for JDE
from one of the workstations that was having the problem, and wouldn't you
know it...the formats saved in the table. I have had this happen before
when I have turned on debugging. It had to do with the fact that when
debugging is on it slows down OneWorld !
!
dramatically, and this seems to resolve the problem. We had it happen in
our previous version, and JDE had to get FarPoint to rewrite there grid DLL
for us.
Anyway, I am going to turn debugging on, on another machine to see if i can
get the formats to stick. If it works, I can at least make them happy until
we can install SP16.
Kevin Benjamin
STIHL LIMITED
OneWorld Admin
XE SP15.1, Update 1, AS400, NTSQL, Citrix
--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=OW&Number=1
3645
