New iSeries 8.12/8.96 Installation Issue

elcid

Member
I'm doing a new install on iSeries, there is one physical machine with 2 LPAR's, one lpar for PD and the other one for DV/PY/PS, I'm going through the install manual, I just install the full DV and PD packages that came with the install, logged in to each environment, ran a test UBE, the process error out, I attached the error logs for review, any assistance would be greatly appreciated.
 
Hi,

1. Have you ran the installation workbench? Any errors?
2. Have you ran PORTTEST on the iSeries?
 
From the errors in your logs I would verify that the RDBDIRE matches the name of your iSeries that you used for installation. Use the WRKRDBDIRE and look for the *LOCAL entry. If it's missing, bingo, if it doesn't match the name of your ES, bingo, otherwise, send more logs.

Gee...I should work for GSC...asking for more logs.
 
I had verified beforehand that the *Local entrie is there on each enterprise server, I have checked that the client had installed the latest PTF's per the mtr's for V5R4.
 
another question, during the installation I created the OWJRNL system datasource, this was created on the PD LPAR, do I also need to create one for the DV/PY LPAR?
 
Back
Top