• Introducing Dark Mode! Switch by clicking on the lightbulb icon next to Search or by clicking on Default style at the bottom left of the page!

UBE error

rbd

Active Member
AS400 B733.2 SP11.2

I get the following message in my jde.log when submitting a UBE to run
local on my machine. I turned on debug and did not see any messages that
helped me.

293/88 Fri Nov 10 15:32:00 2000 szblobf104
MSC0001001 - jdeBuildDSBlobFormat2 failed in jdeBuildDSBlobFormat

Has anyone seen this? I have tried erasing my check out and checking it out
again but I get the same thing.

Bryan Diehn
Marley Cooling Tower Company
Cell 913 219-3216 Home 480 699-4720 Office 913 664-7488 Fax 913
312-8689
 

Zoltan_Gyimesi

Legendary Poster
Bryan,
Has your UBE Processing Otions?
If it has then try to checkout the PO template too.
Further, try to run a brand new version too (Add, not Copy!).
Let us know the result.
Good luck,
Zoltán
 
G

Guest

Guest
This may be a long shot but see if the processing options or the report
layout are set to retrieve media objects. I had a similar problem a long
time ago and it turned out to be something to do with the data dictionary
settings which were different locally. Resynchronise the local data
dictionary and try again.

Andrew Holder
DWS Ltd.




BRYAN_DIEHN <BRYAN_DIEHN@marleyct.com> on 11/10/2000 08:33:21 PM

Please respond to jdeowdev@jdelist.com

To: jdeowdevml@jdelist.com
cc: (bcc: Andrew Holder/Tamro)
Subject: UBE error ~~0:918




AS400 B733.2 SP11.2

I get the following message in my jde.log when submitting a UBE to run
local on my machine. I turned on debug and did not see any messages that
helped me.

293/88 Fri Nov 10 15:32:00 2000 szblobf104
MSC0001001 - jdeBuildDSBlobFormat2 failed in jdeBuildDSBlobFormat

Has anyone seen this? I have tried erasing my check out and checking it out
again but I get the same thing.

Bryan Diehn
Marley Cooling Tower Company
Cell 913 219-3216 Home 480 699-4720 Office 913 664-7488 Fax 913
312-8689




--------------------------
To view this thread, visit the JDEList forum at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=0&Board=OWDEV&Num
ber=918
*************************************************************
This is the JDEList One World / XE Developers Mailing List.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found at http://www.JDELIST.com
*************************************************************
 

rbd

Active Member
Zoltan,
I ended up deselecting the Processing Option then reattaching it. It was
only LOCAL on my machine so I did not have to check it out. The link must
have been corrupted somehow.
Thanks
Bryan Diehn
Marley Cooling Tower Company
Cell 913 219-3216 Home 480 699-4720 Office 913 664-7488 Fax 913
312-8689



Zoltan_Gyimesi
<zoltan.gyimesi@sy To: jdeowdevml@jdelist.com
nergon.hu> cc:
Sent by: Subject: Re: UBE error ~~918:963
owner-jdeowdevml@j
delist.com


11/13/00 08:55 AM
Please respond to
jdeowdev






Bryan,
Has your UBE Processing Otions?
If it has then try to checkout the PO template too.
Further, try to run a brand new version too (Add, not Copy!).
Let us know the result.
Good luck,
Zoltán


--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat
=&Board=OWDEV&Number=963
*************************************************************
This is the JDEList One World / XE Developers Mailing List.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found at http://www.JDELIST.com
*************************************************************
 

rbd

Active Member
Zoltan,
I ended up detaching the PO then reattaching it. The link must have been
corrupted somehow.
Thanks
Bryan Diehn
Marley Cooling Tower Company
Cell 913 219-3216 Home 480 699-4720 Office 913 664-7488 Fax 913
312-8689



Zoltan_Gyimesi
<zoltan.gyimesi@sy To: jdeowdevml@jdelist.com
nergon.hu> cc:
Sent by: Subject: Re: UBE error ~~918:963
owner-jdeowdevml@j
delist.com


11/13/00 08:55 AM
Please respond to
jdeowdev






Bryan,
Has your UBE Processing Otions?
If it has then try to checkout the PO template too.
Further, try to run a brand new version too (Add, not Copy!).
Let us know the result.
Good luck,
Zoltán


--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat
=&Board=OWDEV&Number=963
*************************************************************
This is the JDEList One World / XE Developers Mailing List.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found at http://www.JDELIST.com
*************************************************************
 

Zoltan_Gyimesi

Legendary Poster
Bryan,
If you have reattached the PO then to be on the safe side you should revise all PO references in the ERs.
Reattaching PO can cause problems when OneWorld tries to match template fields with the ER references, it isn't always successful.
Good luck,
Zoltán

B7332 SP11, ESU 4116422, Intel NT4, SQL 7 SP1
(working with B7321, B7331, XE too)
 
Top