Screen Design Aid

Colette_Culver

Member
I am trying to create a Video by taking Option 10 from SVR. When I take
this Option, the screen only blinks, it does not take me to JDE SDA. Can
anyone tell me if I do not have something installed or why this might be
happening? I can access AS/400 SDA, but was under the impression I needed
to create my Video using JDE SDA, in order to use C.A.S.E to generate code.

TIA

Colette J. Culver
Programmer/Analyst
Metropolitan Government of Nashville and Davidson County
Phone 615.880.2812
Fax 615.880.2805
 
You need to use PDM to edit your source member. Visually look at your code
and see that
all of the code is in the proper places, particularly where you might have a
skip or space
keyword, these could be a space or two off. The other thing to look at is
if the video has
any funny numbering lines. I have found where these have caused me problems
in some videos
and printer files. These occur because someone has used SDA, RLU or just
SEU to edit these.

I hope this helps, if not then I would say if you could get me a copy of the
source via email
I would look at it and see if I could tell what the problem might be.

Jim
 
I do not have DSPF source yet, I am wanting to use Option 10 from the SVR
screen to create my DSPF.

Colette J. Culver
Programmer/Analyst
Metropolitan Government of Nashville and Davidson County
Phone 615.880.2812
Fax 615.880.2805
 
Ok so you trying to use SVR's 10 for a new video?
Do your SVR screen look something like below?

9801 Software Versions Repository

Action Code. . . I
Member ID. . . . VTSTJRR
Description. . . Display Segment Print Control Values
Function Code. . DSPF Video Display Files
Function Use . . 111 File Maintenance
Product Code . . CF Fike Configurator Processing
Reporting System CF Fike Configurator Processing
Base Member Name PTSSTRR File Prefix. . .
Maint/RSTDSP . . 1 Omit Option. . . Generation Sev .
Copy Data (Y/N). N Optional File. . N Common File. . . N

O Source Object Source CMS / Version S D User
Date
P Library Library File Suffix ID C P ID
Modified
10 JIMR JIMR QDDSSRC 4 JIMR
09/14/01


Opt: 1=Browse 2=Edit 3=Copy 5=SAR 8=Print 9=Dlt 10=Design 14=Crt


The Source File must exist in the source library you have listed.
You could try changing your job to -- LOG(4 00 *SECLVL) LOGCLPGM(*YES) and
try to do the
10 and then display your job log to see if there are any additional messages
about what is
wrong.

Jim
 
Back
Top