• Introducing Dark Mode! Switch by clicking on the lightbulb icon next to Search or by clicking on Default style at the bottom left of the page!

Prerequsite ESU release level requirement

kalinl

Member
Hi,
I am trying to apply the Prerequisite ESU 4605023 and the Setup would not allow me to proceed, as it reads from the registry that I am at "B733". I am in fact B7332SP13.1, but the "current release" level key does say "B733". Does anyone know what are the implications if I change either the key or the value or the "Setup.inf" in the ESU directory to make this whole thing match?
 

hotm6654

Well Known Member
I have seen this before and, believe it or not, sometimes rebooting the
deployment server helps resolve the problem, (don't ask me why because I do
not know).


----- Original Message -----
From: "kalinl" <kalin@lozev.com>
To: <jdelistml@jdelist.com>
Sent: Monday, December 18, 2000 1:47 PM
Subject: Prerequsite ESU release level requirement ~~0:2874


> Hi,
> I am trying to apply the Prerequisite ESU 4605023 and the Setup would not
allow me to proceed, as it reads from the registry that I am at "B733". I am
in fact B7332SP13.1, but the "current release" level key does say "B733".
Does anyone know what are the implications if I change either the key or the
value or the "Setup.inf" in the ESU directory to make this whole thing
match?
>
>
> --------------------------
> Visit the forum to view this thread at:
>
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=OW&Number=2
874
> *************************************************************
> This is the JDEList One World / XE Mailing List.
> Archives and information on how to SUBSCRIBE, and
> UNSUBSCRIBE can be found at http://www.JDELIST.com
> *************************************************************
>
>
 

DaKAA

Member
The fix for this is locating the "UpdateLevel" registry entry on your
deployment server which is in
HKey_local_machine\Software\JDEdwards\OneWorld\Install.ini and changing it
from "1" to "2".


Keith Anderson
Bic Consumer Products
 

loriw

Active Member
Below is the response I got from JDE Support - I did this and was able
to continue okay. Also the Internet code change file has been moved to
the planner/data directory.

We have had a few clients who are applying the new JDxxxx ESUs and the
following error message appears:

"Installation has detected that the release level of the deployment
server is B7331 and the installation is intended for B7332. Continuing
is not recommended."
You must make sure UpdateLevel ="2" is changed in the registry under:

HKEY_LOCAL_MACHINE-->SOFTWARE-->OneWorld-->Install.ini-->B733

We have seen this occur when someone has upgraded from B7331 to B7332
and the registry hasn't been modified.

Hope this helps.

Lori Waybright
Inland Empire Paper


>
 

Ricardo Paz

Reputable Poster
Hi, I'm having the same problem when trying to aply the JD4246 ESU... I've
already rebooted my deployment server, but it still says I'm on the wrong
version.

OW 73.3.2 SP 10.1 / NT 4.0 / SQL 7.0

Greetings.
SI. Ricardo Paz Castañón
Systems Chief
Comercial de Herramientas S.a de C.v.
+52(8)369-35-35
rpaz@cohesa.com.mx
www.cohesa.com


-----Mensaje original-----
De: JD Nowell [mailto:hotm6654@hotmail.com]
Enviado el: Lunes, 18 de Diciembre de 2000 02:27 p.m.
Para: jdelist@jdelist.com; jdelistml@jdelist.com
Asunto: Re: Prerequsite ESU release level requirement ~~0:2874


I have seen this before and, believe it or not, sometimes rebooting the
deployment server helps resolve the problem, (don't ask me why because I do
not know).


----- Original Message -----
From: "kalinl" <kalin@lozev.com>
To: <jdelistml@jdelist.com>
Sent: Monday, December 18, 2000 1:47 PM
Subject: Prerequsite ESU release level requirement ~~0:2874


> Hi,
> I am trying to apply the Prerequisite ESU 4605023 and the Setup would not
allow me to proceed, as it reads from the registry that I am at "B733". I am
in fact B7332SP13.1, but the "current release" level key does say "B733".
Does anyone know what are the implications if I change either the key or the
value or the "Setup.inf" in the ESU directory to make this whole thing
match?
>
>
> --------------------------
> Visit the forum to view this thread at:
>
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=OW&Number=2
874
> *************************************************************
> This is the JDEList One World / XE Mailing List.
> Archives and information on how to SUBSCRIBE, and
> UNSUBSCRIBE can be found at http://www.JDELIST.com
> *************************************************************
>
>
*************************************************************
This is the JDEList One World / XE Mailing List.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found at http://www.JDELIST.com
*************************************************************



Lic. Ricardo Paz Castanon
Jefe Sistemas COHESA
 

kalinl

Member
Re: RE: Prerequsite ESU release level requirement

Thank all of you for responding so quickly... Neither works, unfortunately.
changed the Update level from 1 to 2
rebooted the machine (number of times)...


I am still waiting vor Denver to respond....

B7332SP13.1
 

Tricia_Rosas

Active Member
Re: Prerequisite ESU release level requirement

I had this problem. The way JDE had me fix it was on the deployment server
under regedit.
HKEY_LOCAL_MACHINE
JDEDWARDS folder
INSTALL.INI
B733 folder
We needed to change the Update Level to "2". (Whatever CUM level you are
at)
When we changed this the ESU was installed.
Good Luck.

Tricia Rosas
Edwards Cardiovascular Resources
Assoc. Technical Specialist
(Email) tricia_rosas@edwards.com



"JD Nowell"
<hotm6654@hotmail To: <jdelist@jdelist.com>, <jdelistml@jdelist.com>
.com> cc:
Sent by: Subject: Re: Prerequsite ESU release level requirement ~~0:2874
owner-jdelistml@j
delist.com


12/18/00 12:27 PM
Please respond to
jdelist






I have seen this before and, believe it or not, sometimes rebooting the
deployment server helps resolve the problem, (don't ask me why because I do
not know).


----- Original Message -----
From: "kalinl" <kalin@lozev.com>
To: <jdelistml@jdelist.com>
Sent: Monday, December 18, 2000 1:47 PM
Subject: Prerequsite ESU release level requirement ~~0:2874


> Hi,
> I am trying to apply the Prerequisite ESU 4605023 and the Setup would not
allow me to proceed, as it reads from the registry that I am at "B733". I
am
in fact B7332SP13.1, but the "current release" level key does say "B733".
Does anyone know what are the implications if I change either the key or
the
value or the "Setup.inf" in the ESU directory to make this whole thing
match?
>
>
> --------------------------
> Visit the forum to view this thread at:
>
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat
=&Board=OW&Number=2
874
> *************************************************************
> This is the JDEList One World / XE Mailing List.
> Archives and information on how to SUBSCRIBE, and
> UNSUBSCRIBE can be found at http://www.JDELIST.com
> *************************************************************
>
>
*************************************************************
This is the JDEList One World / XE Mailing List.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found at http://www.JDELIST.com
*************************************************************
 

kalinl

Member
ok, I got the fix - in my case I changed the value for "CurrentRelease" to B7332 - only to apply the ESU - no starting of OW. Than reverted back to original value - B733

B7332SP13.1
AS/400V4R4
 

Ricardo Paz

Reputable Poster
Where did you change this value??

OW 73.3.2 SP 10.1 / NT 4.0 / SQL 7.0

Greetings.
SI. Ricardo Paz Castañón
Systems Chief
Comercial de Herramientas S.a de C.v.
+52(8)369-35-35
rpaz@cohesa.com.mx
www.cohesa.com


-----Mensaje original-----
De: kalinl [mailto:kalin@lozev.com]
Enviado el: Martes, 19 de Diciembre de 2000 01:36 a.m.
Para: jdelistml@jdelist.com
Asunto: Re: Prerequsite ESU release level requirement ~~2874:2907


ok, I got the fix - in my case I changed the value for "CurrentRelease" to
B7332 - only to apply the ESU - no starting of OW. Than reverted back to
original value - B733

B7332SP13.1
AS/400V4R4
--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=&Board=OW&Number=2
907
*************************************************************
This is the JDEList One World / XE Mailing List.
Archives and information on how to SUBSCRIBE, and
UNSUBSCRIBE can be found at http://www.JDELIST.com
*************************************************************



Lic. Ricardo Paz Castanon
Jefe Sistemas COHESA
 
Top