• Introducing Dark Mode! Switch by clicking on the lightbulb icon next to Search or by clicking on Default style at the bottom left of the page!

OS/400 Command in JDE menu

ekempter

Administrator
Date: Tue, 7 Nov 2000 00:04:28 -0800 (PST)
To: jdeworldml@jdelist.com
From: JrBelgium <JrBelgium@hotmail.com>
Reply-to: jdeworld@jdelist.com
Subject: OS/400 Command in JDE menu ~~0:568

Hello, all,

I'm trying to figure out if there's a way to start an
OS/400 Command (e.g.
WRKOUTQ PRT01) from a menu
(this is, as a menu item), there should be a way of
doing that without writing
a CL right ???
Anyone has any suggestions ???

thx...

Jr.





AS/400 4.3 JDE World 7.3
 

svdgi

Active Member
Yes , give the job to execute as J00CMD and then in
the program to execute write the standard as/400
command,though prt01 is a part of F4.Or make a command
then add instead of using an as/400 command use a
user-defined command..
--- ekempter <noerick.norcal@cleancity.com> wrote:
> Date: Tue, 7 Nov 2000 00:04:28 -0800 (PST)
> To: jdeworldml@jdelist.com
> From: JrBelgium <JrBelgium@hotmail.com>
> Reply-to: jdeworld@jdelist.com
> Subject: OS/400 Command in JDE menu ~~0:568
>
> Hello, all,
>
> I'm trying to figure out if there's a way to start
> an
> OS/400 Command (e.g.
> WRKOUTQ PRT01) from a menu
> (this is, as a menu item), there should be a way of
> doing that without writing
> a CL right ???
> Anyone has any suggestions ???
>
> thx...
>
> Jr.
>
>
>
>
>
> AS/400 4.3 JDE World 7.3
> --------------------------
> To view this thread, visit the JDEList forum at:
>
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=0&Board=W&Number=615
>
>
*************************************************************
> This is the JDEList World Mailing List.
> Archives and information on how to SUBSCRIBE, and
> UNSUBSCRIBE can be found at http://www.JDELIST.com
>
*************************************************************
>


__________________________________________________
Do You Yahoo!?
Thousands of Stores. Millions of Products. All in one Place.
http://shopping.yahoo.com/
 

donbryant

Active Member
not without a CLP.....


Don Bryant MIS Director mailto:donbryant@amalie.com
Amalie Oil Company
813-248-1988 ext 124 fax: 813-248-1488
1601 McCloskey Blvd.
Tampa, Fl. 33605-6731





Don Bryant, MIS Director
Phone 813-248-1988 ext 124
Fax 813-248-1488
 

CatD

Active Member
Adding an IBM Command on a Menu
To add an IBM command on the J.D. Edwards menu selection
From Menus (G901), choose Revisions
1.
Enter a description.
2.
Set the execute job to J00CMD
3.
Set Option Cntrl to 1
4.
Set the Option Key to the IBM command you want to execute.
5.
Set Version to blank if you want a prompt or set Version to *NOPROMPT if
you want no prompting
 

wayne_severson

Active Member
Yes you can execute an IBM command from a JDE Menu.

This is found on page 9-26 of the Technical Foundation A7.3 text.

1. Enter a description

2. set the execute job to J00CMD

3. Set Option Code to 1

4. Set Option Key to the IBM command

5. Set Version to blank if you want a prompt or set to *NOPROMPT if you want
no prompting.

Wayne A. Severson
Programmer Analyst/Technical Specialist
Grote Industries, LLC.
2600 Lanier Drive
Madison, IN 47250
Tel: 812.265.8457
Fax: 812.273.8658
E-mail: wayne.severson@grote.com
 
Top