F967611 not getting updated..

[oneworld_101]

Hello Everyone,
I send out this email before, but I didn't get any response, so I am =
trying it again.


When I apply an ASU or ESU, it completes successfully with out any =3D
errors, It updates the F9671 locally but It doesn't update the =3D
System-B7333 F9671, It also doesn't update F967611 locally or on the =3D
server. This started happening after applying ESU 10371.

Any Ideas why?

Thanks

OneWorld Xe, SP15.1, all One-Offs, Update 2

 

[SSAJAROFF92]

Hi!

Have you read the special instruction for JD10371?
I remember that I had to Generate Tables for F9671 and F967611 on
both System - B7333 and OneWorld Local (Planner).
I recommend you to read the special instruction... it's well explained.
Sebastian

 

[simon_mcdermott1]

The new planner ESU has OCM Mappings for this table. Also, have you
generated the table in Local and System - B7333

Simon

 

[oneworld_101]

Yes the table has been generated both locally and on the server and yes I
have applied the new esu
----- Original Message -----
From: "simon_mcdermott" <[email protected]>
To: <[email protected]>
Sent: Monday, October 29, 2001 5:31 PM
Subject: RE: F967611 not getting updated..


http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=0&Board=OW&Number=
23299

 

[husni]

Hi,
We also faced the same problem. Check the special instructions for SAR-5001660 which is to copy OCM mappings to F967611 table from JDEPLAN.

Husni

XE, SP17, UPD3, JD11968
WIN2000, SQL2000

 

[oneworld_101]

As far as the special instruction, I went over it couple of times and
completed it correctly.
----- Original Message -----
From: "Husni" <[email protected]>
To: <[email protected]>
Sent: Tuesday, October 30, 2001 11:58 PM
Subject: Re: F967611 not getting updated..


SAR-5001660 which is to copy OCM mappings to F967611 table from JDEPLAN.
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat=0&Board=OW&Number=
23339