EDI Tolerance Rules

Michelle D.

Active Member
Hi List,

Please review the following receiving example:
(We are using Quantity Tolerance %.)

Line 1.000 UORG = 100, UREC = 175
Line 2.000 UORG = 100, UREC = 100

After running R47071, the expected result is that line 1.000 receives an error and is not processed and that line 2.000 processes normally. Unfortunately that is not what is happening. Line 2.000 does process normally and is just fine. The problem is with line 1.000.

Records are being inserted into F4111 and F41021 for line 1.000 even though it had a tolerance error. (No records are written to F43121, F0911, F4311.) F47071 and F47072 have EDSP = Y for both lines. The PDF does show that line 1.000 has an error.

What I've found is that if the last line being processed is "good", it is processed correctly, but any "bad" lines are partially processed (F4111 & F41021). If the last line is "bad", then NONE of the lines are processed.

I believe the problem is with XT4312Z2 Edit Line.

Has anyone else encountered this issue?

Thank you,
Michelle
OneWorld Xe XU6
 
Back
Top