ddw_chi
Member
Does anyone know of any alert software that we can use with JDE A7.3 World or on the AS400 operating system V4R5M0?
sclind
Member
What exactly are you looking for it to do?
(That would influence my answer).
Scott Lindstrom
ddw_chi
<[email protected] To: [email protected]
m> cc:
Sent by: Subject: Alert Software for JDE and an AS400
owner-jdeworldml@j
delist.com
05/29/2001 10:58
AM
Please respond to
jdeworld
Does anyone know of any alert software that we can use with JDE A7.3 World
or on the AS400 operating system V4R5M0?
--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat
=&Board=W&Number=11747
(That would influence my answer).
Scott Lindstrom
ddw_chi
<[email protected] To: [email protected]
m> cc:
Sent by: Subject: Alert Software for JDE and an AS400
owner-jdeworldml@j
delist.com
05/29/2001 10:58
AM
Please respond to
jdeworld
Does anyone know of any alert software that we can use with JDE A7.3 World
or on the AS400 operating system V4R5M0?
--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat
=&Board=W&Number=11747
kevin_kettels
Member
Informational APARs designed for JDE on the iSeries 400 can be viewed at..
www.as400.ibm.com/service/bms/jde-support.htm
The APAR for V4R5M0 is II12445
Kevin Kettels
Director / Information Systems
Pretty Products, Inc.
9406/720 World A8.1 Cum 2
www.as400.ibm.com/service/bms/jde-support.htm
The APAR for V4R5M0 is II12445
Kevin Kettels
Director / Information Systems
Pretty Products, Inc.
9406/720 World A8.1 Cum 2
ddw_chi
Member
I am trying to get it to shutdown my machine with a power down system command if our UPS power gets low, or call me to indicate the UPS has has been activated.
lpryor
Active Member
Robot from Helpsystems
ddw_chi
<[email protected] To: [email protected]
m> cc:
Sent by: Subject: Alert Software for JDE and an AS400
owner-jdeworldml@j
delist.com
05/29/2001 11:58
AM
Please respond to
jdeworld
Does anyone know of any alert software that we can use with JDE A7.3 World
or on the AS400 operating system V4R5M0?
--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat
=&Board=W&Number=11747
ddw_chi
<[email protected] To: [email protected]
m> cc:
Sent by: Subject: Alert Software for JDE and an AS400
owner-jdeworldml@j
delist.com
05/29/2001 11:58
AM
Please respond to
jdeworld
Does anyone know of any alert software that we can use with JDE A7.3 World
or on the AS400 operating system V4R5M0?
--------------------------
Visit the forum to view this thread at:
http://198.144.193.139/cgi-bin/wwwthreads/showflat.pl?Cat
=&Board=W&Number=11747
ddw_chi
Member
Kevin, I know about that apar (II12445), but thanks anyway, I am looking for an alert type of software that will call me if our UPS is activated. Any ideas?
Colin_Hugill
Reputable Poster
ddw_chi,
Perhaps you should be looking at the standard AS/400 system values like
QUPSDLYTIM, QUPSMSGQ, QPWRRSTIPL.
I know of one brand of alert software - ROBOT. I don't know who distributes
in North America. If it is urgent then I can try out find out for you.
Regards...... Colin HUGILL
Colin Hugill
Consultant
Perhaps you should be looking at the standard AS/400 system values like
QUPSDLYTIM, QUPSMSGQ, QPWRRSTIPL.
I know of one brand of alert software - ROBOT. I don't know who distributes
in North America. If it is urgent then I can try out find out for you.
Regards...... Colin HUGILL
Colin Hugill
Consultant
SteveMH
Member
Try Robot/UPS and Robot Alert from Help/Systems(www.helpsystems.com). Robot
UPS will follow a set of instructions if the AS/400 detects a power loss.
This can include notifying users and yourself, shutting down subsystems and
ultimately shutting down your AS/400. It works well for us.
All the Best
Steve Hancock
UPS will follow a set of instructions if the AS/400 detects a power loss.
This can include notifying users and yourself, shutting down subsystems and
ultimately shutting down your AS/400. It works well for us.
All the Best
Steve Hancock
Patricia
Member
How about robot alert.
bstenberg
Member
We use MessangerPlus (http://www.bytware.com/) it has saved us many times.
dale_draper
Well Known Member
A signal is automatically generated by the UPS which will be understood by
OS400, you must simply tell OS400 what to do when receiving the different
signals the UPS sends. 1st thing to do is get cabled up. Then, assuming you
have IBM support, call them, they are very helpful.
You then can also create a job that monitors for such a signal and dials out
to a pager number.
This "alert" software has nothing to do with JDE by the way, just that JDE
happens to reside on the server.
OS400, you must simply tell OS400 what to do when receiving the different
signals the UPS sends. 1st thing to do is get cabled up. Then, assuming you
have IBM support, call them, they are very helpful.
You then can also create a job that monitors for such a signal and dials out
to a pager number.
This "alert" software has nothing to do with JDE by the way, just that JDE
happens to reside on the server.
sclind
Member
(But you must have the appropriate signal cable between the UPS and the
AS/400 for this to work).
Here is a vendor we like:
http://www.helpsystems.com/products/ups.html
Scott Lindstrom
"Draper, Dale"
<[email protected] To: "'[email protected]'"
ega.com> <[email protected]>, [email protected]
Sent by: cc:
owner-jdeworldml@j Subject: RE: Alert Software for JDE and an
delist.com AS400
05/30/2001 07:56
AM
Please respond to
jdeworld
A signal is automatically generated by the UPS which will be understood by
OS400, you must simply tell OS400 what to do when receiving the different
signals the UPS sends. 1st thing to do is get cabled up. Then, assuming you
have IBM support, call them, they are very helpful.
You then can also create a job that monitors for such a signal and dials
out
to a pager number.
This "alert" software has nothing to do with JDE by the way, just that JDE
happens to reside on the server.
AS/400 for this to work).
Here is a vendor we like:
http://www.helpsystems.com/products/ups.html
Scott Lindstrom
"Draper, Dale"
<[email protected] To: "'[email protected]'"
ega.com> <[email protected]>, [email protected]
Sent by: cc:
owner-jdeworldml@j Subject: RE: Alert Software for JDE and an
delist.com AS400
05/30/2001 07:56
AM
Please respond to
jdeworld
A signal is automatically generated by the UPS which will be understood by
OS400, you must simply tell OS400 what to do when receiving the different
signals the UPS sends. 1st thing to do is get cabled up. Then, assuming you
have IBM support, call them, they are very helpful.
You then can also create a job that monitors for such a signal and dials
out
to a pager number.
This "alert" software has nothing to do with JDE by the way, just that JDE
happens to reside on the server.
stevent
Member
There was a program out several years ago called "Robot" that would do what
you are wanting. Monitor disk space, UPS, etc. etc... Unfortunately I do
not remember who made the product. I don't even know if they are still
around.
Steven Trudo
PC Systems Manager
Main Street and Main Incorporated
(602)852-9034 FAX: (602)852-0001
[email protected] [email protected]
Redundancy, what a wonderful thing!
you are wanting. Monitor disk space, UPS, etc. etc... Unfortunately I do
not remember who made the product. I don't even know if they are still
around.
Steven Trudo
PC Systems Manager
Main Street and Main Incorporated
(602)852-9034 FAX: (602)852-0001
[email protected] [email protected]
Redundancy, what a wonderful thing!
Nichelle
Well Known Member
There is a white paper (PDF format) from IBM, Backup, Recovery &
Availability that covers a controlled system shut done when the UPS is
activated. If you want I can e-mail it to you directly. We recently
activated it and realized how many hits we were getting and not even knowing
it. And it's free.
Nichelle Wilcox
Application Development Manager
Furr's Restaurant Group
Richardson, Tx
JDE World A73.11 720 v4r4
Availability that covers a controlled system shut done when the UPS is
activated. If you want I can e-mail it to you directly. We recently
activated it and realized how many hits we were getting and not even knowing
it. And it's free.
Nichelle Wilcox
Application Development Manager
Furr's Restaurant Group
Richardson, Tx
JDE World A73.11 720 v4r4
ddw_chi
Member
Re: RE: Alert Software for JDE and an AS400
Nichelle, I would like to see that white paper if you can email it to me, at [email protected].
Thanks
Nichelle, I would like to see that white paper if you can email it to me, at [email protected].
Thanks
