(But you must have the appropriate signal cable between the UPS and the
AS/400 for this to work).
Here is a vendor we like:
http://www.helpsystems.com/products/ups.html
Scott Lindstrom
"Draper, Dale"
<dale.draper@seu.s To: "'jdeworld@jdelist.com'"
ega.com> <jdeworld@jdelist.com>,
jdeworldml@jdelist.com
Sent by: cc:
owner-jdeworldml@j Subject: RE: Alert Software for JDE and an
delist.com AS400
05/30/2001 07:56
AM
Please respond to
jdeworld
A signal is automatically generated by the UPS which will be understood by
OS400, you must simply tell OS400 what to do when receiving the different
signals the UPS sends. 1st thing to do is get cabled up. Then, assuming you
have IBM support, call them, they are very helpful.
You then can also create a job that monitors for such a signal and dials
out
to a pager number.
This "alert" software has nothing to do with JDE by the way, just that JDE
happens to reside on the server.